About Settings for TH6 Mobile
Updated
by
Cheryl Wallace
The Settings are normally accessed immediately after installation to set the Server and Company Alias before logging in, but can be accessed at any time via tapping the Settings 
icon in the left side menu.
Settings that can be adjusted:
Server | Enter the server URL/IP address used to access ToolHound 6 from the browser. Be sure to include http:// or https:// and any leading www to the address. ToolHound 6 Cloud subscribers should enter https://www.mytoolhound.com |
Company Alias | Enter the company alias used to log in to ToolHound 6. |
Item ID's have numbers only? | Check this box if all item ID's are numbers only with no letters or special characters. |
Personnel ID's have numbers only? | Check this box if all personnel ID's are numbers only with no letters or special characters. |
Use CS108 RFID reader? | Check this box to pair the device with a CS108 RFID Reader via Bluetooth. |
Ignore count warnings? | When turned on, will not display "Item not in count" and "Item is from another stocking point" warnings. |
See also:
Copyright © 2020-2023 ToolHound Inc. All Rights Reserved.